Hugo-Nginx

Overview

This is a flavour containing the hugo website builder and nginx, a webserver.

This is a minimal config with no SSL configured as this is expected to be handled by a proxy to the image.

It has been put together specifically for use by the https://potluck.honeyguide.net website, however it could be utilised for any site.

You can adjust this flavour and rebuild your own pot image if you have other requirements.

Disclaimer

It is advised to run this image behind a proxy. The directory permissions on the hugo folder are very permissive to allow a jenkins user in another pot image to do stuff. Run the hugo-nginx and jenkins pot images behind a proxy with access control.

Installation

  • Create a ZFS data set on the parent system beforehand zfs create -o mountpoint=/mnt/<sitename> zroot/jaildata_hugo
  • Create your local jail from the image or the flavour files.
  • Clone the local jail
  • Mount in the ZFS data set you created: pot mount-in -p <jailname> -d /mnt/<sitename> -m /mnt
  • Optionally copy in jenkins user SSH public key: pot copy-in -p <jailname> -s /path/to/jenkins/id_rsa.pub -d /root/jenkins.pub
  • Optionally copy in customfile.tgz: pot copy-in -p <jailname> -s /path/to/customfile.tgz -d /root/customfile.tgz
  • Optionally export the ports after creating the jail: pot export-ports -p <jailname> -e 80:80
  • Adjust to your environment:
    sudo pot set-env -p <jailname> \
    -E NODENAME=name \
    -E DATACENTER=datacenter \
    -E CONSULSERVERS=<'"list", "of", "consul", "IPs"'> \
    -E SERVERNAME=<fqdn> \
    -E IP=<IP of potbuilder VM> \
    -E SITENAME=<site name> \
    -E GITEMAIL=<git user email> \
    -E GITUSER=<git username> \
    [ -E CUSTOMDIR=<custom dir inside huge sitename> ] \
    [ -E CUSTOMFILE=1 -E IMPORTKEYS=1 ] \
    [ -E THEMEADJUST=1 ] \
    [ -E REMOTELOG=<IP syslog-ng server> ]
    

The NODENAME parameter is the name of the node.

The DATACENTER parameter is the name of the datacenter. The REGION parameter is to set “east” or “west” or “global” (default).

The CONSULSERVERS parameter defines the consul server instances, and must be set as CONSULSERVERS='"10.0.0.2"' or CONSULSERVERS='"10.0.0.2", "10.0.0.3", "10.0.0.4"' or CONSULSERVERS='"10.0.0.2", "10.0.0.3", "10.0.0.4", "10.0.0.5", "10.0.0.6"'

The IP parameter is the IP address of the pot image.

The SERVERNAME parameter is the fully qualified domain name to configure nginx with.

The SITENAME parameter is the name of the hugo site and affects directory naming.

The GITEMAIL parameter is the email address to use for a git username.

The GITUSER parameter is the git username associated with the email address.

The CUSTOMDIR parameter is a custom directory to create inside the hugo installation in SITENAME.

The CUSTOMFILE parameter, if set to 1, will copy in your own customfile.tgz which will be extracted to /mnt/{SITENAME}/. This would be a custom config.toml, static microblog posts or about.md pages and images for static dir.

The IMPORTKEYS parameter, if set to 1, will add the copied in pubkey to authenticated_keys. Copy in the applicable id_rsa.pub as part of the pot setup and start process.

The THEMEADJUST parameter, if set to 1, will make changes specific to http://potluck.honeyguide.net.

REMOTELOG is an optional parameter for a remote syslog service, such as via the loki or beast-of-argh images on potluck site.

Usage

Start hugo manually (not necessary):

cd /mnt/sitename && hugo

To access hugo:

  • http://hugo-host-name

The default site is blank.

customfile.tgz

If you wish to include a custom setup for hugo, you can create a file customfile.tgz with the following folder structure:

./config.toml
./static
./static/mylogo.png
./content/info.md
./content/micro/news.md
./content/micro/about.md

Make sure to copy-in to /root/customfile.tgz and set -E CUSTOMFILE=1 in the parameters.

Persistent storage

To use persistent storage make sure to mount-in a pre-configured data set to /mnt/(your-sitename).

Getting Started

How To Use The Ready-Made Image

FreeBSD 13.1:
pot import -p hugo-nginx-amd64-13_1 -t 0.0.26 -U https://potluck.honeyguide.net/hugo-nginx

FreeBSD 12.3:
pot import -p hugo-nginx-amd64-12_3 -t 0.0.26 -U https://potluck.honeyguide.net/hugo-nginx

If you don’t want to use the default pot bridged network configuration but instead need an individual network setup (e.g. assign a host IP address), after importing it you can simply clone the jail like that (em0 is the host network adapter in this example):
pot clone -P hugo-nginx-amd64-13_1 -p my-cloned-jail -N alias -i "em0|10.10.10.10"

Note: Some images might require specific network configuration, double check the Overview-chapter at the top.

Alternatively: Create a Jail With This Flavour Yourself

1. Create Flavour Files

Save all files and directories from https://github.com/hny-gd/potluck/tree/master/hugo-nginx to /usr/local/etc/pot/flavours/

2. Create Jail From Flavour

Run
pot create -b <FreeBSD Version> -p <jailname> -t single -N public-bridge -f fbsd-update

with your FreeBSD version (e.g. 13.1) and the name your jail should get.

Note: Some images might require specific network configuration, double check the Overview-chapter at the top.

Version History

0.0.26

  • Adding ‘or true’ where applicable for hugo steps

0.0.25

  • Version bump for rebuild

0.0.24

  • Add missing node_exporter installation

0.0.23

  • Rebuild to fix consul error, fix consul.hcl for new format

0.0.22

  • Version bump for rebuild to fix missing images on potluck site

0.0.21

  • Version bump for p3 rebuild
  • Add checklist

0.0.20

  • Version bump for new base image, cook script

0.0.19

  • Version bump for FreeBSD-13.1 image

0.0.18

  • Adding customdir to gitignore and other tweaks

0.0.17

  • Starting nginx before configuring goaccess. Setting git safedirectory

0.0.16

  • Adjusting goaccess for custom goaccess.conf file

0.0.15

  • Adding syslog-ng and remotelogs

0.0.14

  • More permissions adjustment

0.0.13

  • Permissions adjustments on mount in

0.0.12

  • Addition of CUSTOMFILE parameter to extract customfile.tgz into SITENAME directory

0.0.11

  • Rebuild for FreeBSD 12_3 and 13 & pot 13

0.0.10

  • Fixing SSH access from jenkins or other

0.0.9

  • Fixing directory permissions third time

0.0.8

  • Fixing directory permissions second time

0.0.7

  • Fixing directory perms on some hugo directories for remote user write access

0.0.6

  • More adjustment to order of steps and removal unnecessary items

0.0.5

  • Hugo site init wipes out a necessary directory creation, changing order of steps

0.0.4

  • Including sample blog and microblog post generation

0.0.3

  • Triggering another rebuild

0.0.2

  • Triggering a rebuild

0.0.1

  • First hugo-nginx pot image specific to the potluck.honeyguide.net site usage

0.0.0

  • Initiate file

These images were built on Sat Nov 5 16:21:23 UTC 2022

Manual Image Download Links

hugo-nginx-amd64-13_1_0.0.26.xz ( 168.554 MB )
hugo-nginx-amd64-13_1_0.0.26.xz.skein ( 0.250977 KB ) hugo-nginx-amd64-13_1_0.0.26.xz.meta ( 0.0478516 KB )

hugo-nginx-amd64-12_3_0.0.26.xz ( 521.581 MB )
hugo-nginx-amd64-12_3_0.0.26.xz.skein ( 0.250977 KB ) hugo-nginx-amd64-12_3_0.0.26.xz.meta ( 0.00195312 KB )

Jenkins Pot Creation Logs

hugo-nginx-amd64-13_1_0.0.26:


hugo-nginx/hugo-nginx:
copy-in -s /usr/local/etc/pot/flavours/hugo-nginx.d/local -d /root/.pot_local
hugo-nginx/hugo-nginx.sh:
#!/bin/sh

# Based on POTLUCK TEMPLATE v3.0
# Altered by Michael Gmelin
#
# EDIT THE FOLLOWING FOR NEW FLAVOUR:
# 1. RUNS_IN_NOMAD - true or false
# 2. If RUNS_IN_NOMAD is false, can delete the <flavour>+4 file, else
#    make sure pot create command doesn't include it
# 3. Create a matching <flavour> file with this <flavour>.sh file that
#    contains the copy-in commands for the config files from <flavour>.d/
#    Remember that the package directories don't exist yet, so likely copy
#    to /root
# 4. Adjust package installation between BEGIN & END PACKAGE SETUP
# 5. Adjust jail configuration script generation between BEGIN & END COOK
#    Configure the config files that have been copied in where necessary

# Set this to true if this jail flavour is to be created as a nomad
# (i.e. blocking) jail.
# You can then query it in the cook script generation below and the script
# is installed appropriately at the end of this script
RUNS_IN_NOMAD=false

# set the cook log path/filename
COOKLOG=/var/log/cook.log

# check if cooklog exists, create it if not
if [ ! -e $COOKLOG ]
then
    echo "Creating $COOKLOG" | tee -a $COOKLOG
else
    echo "WARNING $COOKLOG already exists"  | tee -a $COOKLOG
fi
date >> $COOKLOG

# -------------------- COMMON ---------------

STEPCOUNT=0
step() {
  STEPCOUNT=$(("$STEPCOUNT" + 1))
  STEP="$*"
  echo "Step $STEPCOUNT: $STEP" | tee -a $COOKLOG
}

exit_ok() {
  trap - EXIT
  exit 0
}

FAILED=" failed"
exit_error() {
  STEP="$*"
  FAILED=""
  exit 1
}

set -e
trap 'echo ERROR: $STEP$FAILED | (>&2 tee -a $COOKLOG)' EXIT

# -------------- BEGIN PACKAGE SETUP -------------

step "Bootstrap package repo"
mkdir -p /usr/local/etc/pkg/repos
# only modify repo if not already done in base image
# shellcheck disable=SC2016
test -e /usr/local/etc/pkg/repos/FreeBSD.conf || \
  echo 'FreeBSD: { url: "pkg+http://pkg.FreeBSD.org/${ABI}/quarterly" }' \
    >/usr/local/etc/pkg/repos/FreeBSD.conf
ASSUME_ALWAYS_YES=yes pkg bootstrap

step "Touch /etc/rc.conf"
touch /etc/rc.conf

# this is important, otherwise running /etc/rc from cook will
# overwrite the IP address set in tinirc
step "Remove ifconfig_epair0b from config"
# shellcheck disable=SC2015
sysrc -cq ifconfig_epair0b && sysrc -x ifconfig_epair0b || true

step "Disable sendmail"
service sendmail onedisable

step "Enable SSH"
service sshd enable

step "Create /usr/local/etc/rc.d"
mkdir -p /usr/local/etc/rc.d

# we need consul for consul agent
step "Install package consul"
pkg install -y consul

step "Install package openssl"
pkg install -y openssl

step "Install package sudo"
pkg install -y sudo

step "Install package curl"
pkg install -y curl

step "Install package jq"
pkg install -y jq

step "Install package jo"
pkg install -y jo

step "Install package nano"
pkg install -y nano

step "Install package bash"
pkg install -y bash

step "Install package rsync"
pkg install -y rsync

step "Install package git"
pkg install -y git

step "Install package nginx"
pkg install -y nginx

step "Install package gohugo"
pkg install -y gohugo

step "Install package node_exporter"
pkg install -y node_exporter

step "Install package syslog-ng"
pkg install -y syslog-ng

step "Clean package installation"
pkg autoremove -y
pkg clean -y

# -------------- END PACKAGE SETUP -------------

#
# Now generate the run command script "cook"
# It configures the system on the first run by creating the config file(s)
# On subsequent runs, it only starts sleeps (if nomad-jail) or simply exits
#

# this runs when image boots
# ----------------- BEGIN COOK ------------------

step "Clean cook artifacts"
rm -rf /usr/local/bin/cook /usr/local/share/cook

step "Install pot local"
tar -C /root/.pot_local -cf - . | tar -C /usr/local -xf -
rm -rf /root/.pot_local

step "Set file ownership on cook scripts"
chown -R root:wheel /usr/local/bin/cook /usr/local/share/cook
chmod 755 /usr/local/share/cook/bin/*

# ----------------- END COOK ------------------


# ---------- NO NEED TO EDIT BELOW ------------

step "Make cook script executable"
if [ -e /usr/local/bin/cook ]
then
    echo "setting executable bit on /usr/local/bin/cook" | tee -a $COOKLOG
    chmod u+x /usr/local/bin/cook
else
    exit_error "there is no /usr/local/bin/cook to make executable"
fi

#
# There are two ways of running a pot jail: "Normal", non-blocking mode and
# "Nomad", i.e. blocking mode (the pot start command does not return until
# the jail is stopped).
# For the normal mode, we create a /usr/local/etc/rc.d script that starts
# the "cook" script generated above each time, for the "Nomad" mode, the cook
# script is started by pot (configuration through flavour file), therefore
# we do not need to do anything here.
#

# Create rc.d script for "normal" mode:
step "Create rc.d script to start cook"
echo "creating rc.d script to start cook" | tee -a $COOKLOG

# shellcheck disable=SC2016
echo '#!/bin/sh
#
# PROVIDE: cook
# REQUIRE: LOGIN
# KEYWORD: shutdown
#
. /etc/rc.subr
name="cook"
rcvar="cook_enable"
load_rc_config $name
: ${cook_enable:="NO"}
: ${cook_env:=""}
command="/usr/local/bin/cook"
command_args=""
run_rc_command "$1"
' > /usr/local/etc/rc.d/cook

step "Make rc.d script to start cook executable"
if [ -e /usr/local/etc/rc.d/cook ]
then
  echo "Setting executable bit on cook rc file" | tee -a $COOKLOG
  chmod u+x /usr/local/etc/rc.d/cook
else
  exit_error "/usr/local/etc/rc.d/cook does not exist"
fi

if [ "$RUNS_IN_NOMAD" != "true" ]
then
  step "Enable cook service"
  # This is a non-nomad (non-blocking) jail, so we need to make sure the script
  # gets started when the jail is started:
  # Otherwise, /usr/local/bin/cook will be set as start script by the pot
  # flavour
  echo "enabling cook" | tee -a $COOKLOG
  service cook enable
fi

# -------------------- DONE ---------------
exit_ok

hugo-nginx/hugo-nginx+1:
hugo-nginx/hugo-nginx+1.sh:

hugo-nginx/hugo-nginx+2:
hugo-nginx/hugo-nginx+2.sh:

hugo-nginx/hugo-nginx+3:
hugo-nginx/hugo-nginx+3.sh:

hugo-nginx/hugo-nginx+4:
hugo-nginx/hugo-nginx+4.sh:
Password:=====>  Create conf dir (/mnt/srv/pot/jails/hugo-nginx-amd64-13_1/conf)
=====>  Cloning freebsd-potluck-amd64-13_1_0_0_6 with snap 
=====>  clone zroot/srv/pot/jails/freebsd-potluck-amd64-13_1_0_0_6/m@1667626577 into zroot/srv/pot/jails/hugo-nginx-amd64-13_1/m
=====>  Setting mountpoint permission for /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m
=====>  Flavour: fbsd-update
=====>  Starting hugo-nginx-amd64-13_1 pot for the initial bootstrap
=====>  mount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp
defaultrouter: 10.192.0.1 -> 10.192.0.1
===>  Starting the pot hugo-nginx-amd64-13_1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
32-bit compatibility ldconfig path: /usr/lib32
Starting Network: lo0 epair0b.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair0b: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:7d:f5:f0:d0:0b
	inet 10.192.0.3 netmask 0xffc00000 broadcast 10.255.255.255
	groups: epair
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 10.192.0.1
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Updating motd:.
Creating and/or trimming log files.
Updating /var/run/os-release done.
Clearing /tmp (X related).
Starting syslogd.
Starting cron.
Starting sendmail_outbound.

Sat Nov  5 16:08:45 UTC 2022
/usr/local/etc/pot/flavours/fbsd-update.sh -> /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp/fbsd-update.sh
=====>  Executing fbsd-update script on hugo-nginx-amd64-13_1
src component not installed, skipped
Looking up update.FreeBSD.org mirrors... 2 mirrors found.
Fetching metadata signature for 13.1-RELEASE from update2.freebsd.org... done.
Fetching metadata index... done.
Inspecting system... done.
Preparing to download files... done.

No updates needed to update system to 13.1-RELEASE-p3.
No updates are available to install.
=====>  Stop the pot hugo-nginx-amd64-13_1
=====>  Remove epair0[a|b] network interfaces
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/dev
=====>  Flavour: hugo-nginx
=====>  Executing hugo-nginx pot commands on hugo-nginx-amd64-13_1
=====>  mount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp
=====>  Source /usr/local/etc/pot/flavours/hugo-nginx.d/local copied in the pot hugo-nginx-amd64-13_1
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp
=====>  /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/dev is already unmounted
=====>  Starting hugo-nginx-amd64-13_1 pot for the initial bootstrap
=====>  mount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp
defaultrouter: 10.192.0.1 -> 10.192.0.1
===>  Starting the pot hugo-nginx-amd64-13_1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
32-bit compatibility ldconfig path: /usr/lib32
Starting Network: lo0 epair0b.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair0b: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:b5:e8:d3:73:0b
	inet 10.192.0.3 netmask 0xffc00000 broadcast 10.255.255.255
	groups: epair
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 10.192.0.1
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Updating motd:.
Creating and/or trimming log files.
Updating /var/run/os-release done.
Clearing /tmp (X related).
Starting syslogd.
Starting cron.
Starting sendmail_outbound.

Sat Nov  5 16:09:07 UTC 2022
/usr/local/etc/pot/flavours/hugo-nginx.sh -> /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp/hugo-nginx.sh
=====>  Executing hugo-nginx script on hugo-nginx-amd64-13_1
WARNING /var/log/cook.log already exists
Step 1: Bootstrap package repo
pkg already bootstrapped at /usr/local/sbin/pkg
Step 2: Touch /etc/rc.conf
Step 3: Remove ifconfig_epair0b from config
Step 4: Disable sendmail
sendmail disabled in /etc/rc.conf
sendmail_outbound disabled in /etc/rc.conf
sendmail_msp_queue disabled in /etc/rc.conf
Step 5: Enable SSH
sshd enabled in /etc/rc.conf
Step 6: Create /usr/local/etc/rc.d
Step 7: Install package consul
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	consul: 1.12.4_2

Number of packages to be installed: 1

The process will require 80 MiB more space.
15 MiB to be downloaded.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching consul-1.12.4_2.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/1] Installing consul-1.12.4_2...
===> Creating groups.
Creating group 'consul' with gid '469'.
===> Creating users
Creating user 'consul' with uid '469'.
===> Creating homedir(s)
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting consul-1.12.4_2: ..... done
Step 8: Install package openssl
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 9: Install package sudo
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 10: Install package curl
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 11: Install package jq
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 12: Install package jo
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 13: Install package nano
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 14: Install package bash
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 15: Install package rsync
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The most recent versions of packages are already installed
Step 16: Install package git
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 28 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	expat: 2.4.9
	git: 2.38.1_1
	libffi: 3.4.2
	mpdecimal: 2.5.1
	p5-Authen-SASL: 2.16_1
	p5-CGI: 4.54
	p5-Clone: 0.45
	p5-Digest-HMAC: 1.04
	p5-Encode-Locale: 1.05
	p5-Error: 0.17029
	p5-GSSAPI: 0.28_2
	p5-HTML-Parser: 3.78
	p5-HTML-Tagset: 3.20_1
	p5-HTTP-Date: 6.05
	p5-HTTP-Message: 6.37
	p5-IO-HTML: 1.004
	p5-IO-Socket-INET6: 2.72_1
	p5-IO-Socket-SSL: 2.075
	p5-LWP-MediaTypes: 6.04
	p5-Mozilla-CA: 20211001
	p5-Net-SSLeay: 1.92
	p5-Socket6: 0.29
	p5-TimeDate: 2.33,1
	p5-URI: 5.12
	pcre2: 10.40
	perl5: 5.32.1_3
	python39: 3.9.15
	readline: 8.1.2

Number of packages to be installed: 28

The process will require 227 MiB more space.
41 MiB to be downloaded.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/28] Fetching p5-Net-SSLeay-1.92.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/28] Fetching p5-IO-Socket-SSL-2.075.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/28] Fetching p5-Socket6-0.29.pkg: ... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/28] Fetching p5-HTTP-Date-6.05.pkg: .. done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/28] Fetching mpdecimal-2.5.1.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [6/28] Fetching p5-GSSAPI-0.28_2.pkg: ..... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [7/28] Fetching python39-3.9.15.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [8/28] Fetching p5-URI-5.12.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [9/28] Fetching p5-IO-Socket-INET6-2.72_1.pkg: .. done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [10/28] Fetching p5-CGI-4.54.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [11/28] Fetching p5-Encode-Locale-1.05.pkg: .. done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [12/28] Fetching perl5-5.32.1_3.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [13/28] Fetching p5-HTML-Parser-3.78.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [14/28] Fetching p5-Mozilla-CA-20211001.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [15/28] Fetching p5-LWP-MediaTypes-6.04.pkg: ... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [16/28] Fetching pcre2-10.40.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [17/28] Fetching libffi-3.4.2.pkg: ...... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [18/28] Fetching p5-TimeDate-2.33,1.pkg: ..... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [19/28] Fetching readline-8.1.2.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [20/28] Fetching p5-IO-HTML-1.004.pkg: .. done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [21/28] Fetching p5-Clone-0.45.pkg: .. done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [22/28] Fetching p5-Digest-HMAC-1.04.pkg: .. done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [23/28] Fetching p5-Error-0.17029.pkg: .... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [24/28] Fetching p5-HTML-Tagset-3.20_1.pkg: .. done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [25/28] Fetching expat-2.4.9.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [26/28] Fetching p5-HTTP-Message-6.37.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [27/28] Fetching git-2.38.1_1.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [28/28] Fetching p5-Authen-SASL-2.16_1.pkg: ...... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/28] Installing perl5-5.32.1_3...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/28] Extracting perl5-5.32.1_3: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/28] Installing p5-TimeDate-2.33,1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/28] Extracting p5-TimeDate-2.33,1: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/28] Installing p5-HTTP-Date-6.05...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/28] Extracting p5-HTTP-Date-6.05: ....... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/28] Installing p5-URI-5.12...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/28] Extracting p5-URI-5.12: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/28] Installing p5-Encode-Locale-1.05...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/28] Extracting p5-Encode-Locale-1.05: ....... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [6/28] Installing p5-LWP-MediaTypes-6.04...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [6/28] Extracting p5-LWP-MediaTypes-6.04: ........ done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [7/28] Installing p5-IO-HTML-1.004...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [7/28] Extracting p5-IO-HTML-1.004: ....... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [8/28] Installing p5-Clone-0.45...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [8/28] Extracting p5-Clone-0.45: ......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [9/28] Installing p5-Socket6-0.29...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [9/28] Extracting p5-Socket6-0.29: ....... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [10/28] Installing p5-HTML-Tagset-3.20_1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [10/28] Extracting p5-HTML-Tagset-3.20_1: ....... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [11/28] Installing p5-HTTP-Message-6.37...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [11/28] Extracting p5-HTTP-Message-6.37: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [12/28] Installing p5-Net-SSLeay-1.92...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [12/28] Extracting p5-Net-SSLeay-1.92: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [13/28] Installing mpdecimal-2.5.1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [13/28] Extracting mpdecimal-2.5.1: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [14/28] Installing p5-GSSAPI-0.28_2...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [14/28] Extracting p5-GSSAPI-0.28_2: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [15/28] Installing p5-IO-Socket-INET6-2.72_1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [15/28] Extracting p5-IO-Socket-INET6-2.72_1: ....... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [16/28] Installing p5-HTML-Parser-3.78...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [16/28] Extracting p5-HTML-Parser-3.78: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [17/28] Installing p5-Mozilla-CA-20211001...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [17/28] Extracting p5-Mozilla-CA-20211001: ........ done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [18/28] Installing libffi-3.4.2...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [18/28] Extracting libffi-3.4.2: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [19/28] Installing readline-8.1.2...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [19/28] Extracting readline-8.1.2: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [20/28] Installing p5-Digest-HMAC-1.04...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [20/28] Extracting p5-Digest-HMAC-1.04: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [21/28] Installing p5-IO-Socket-SSL-2.075...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [21/28] Extracting p5-IO-Socket-SSL-2.075: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [22/28] Installing python39-3.9.15...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [22/28] Extracting python39-3.9.15: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [23/28] Installing p5-CGI-4.54...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [23/28] Extracting p5-CGI-4.54: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [24/28] Installing pcre2-10.40...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [24/28] Extracting pcre2-10.40: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [25/28] Installing p5-Error-0.17029...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [25/28] Extracting p5-Error-0.17029: ......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [26/28] Installing expat-2.4.9...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [26/28] Extracting expat-2.4.9: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [27/28] Installing p5-Authen-SASL-2.16_1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [27/28] Extracting p5-Authen-SASL-2.16_1: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [28/28] Installing git-2.38.1_1...
===> Creating groups.
Creating group 'git_daemon' with gid '964'.
===> Creating users
Creating user 'git_daemon' with uid '964'.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [28/28] Extracting git-2.38.1_1: .......... done
=====
Message from python39-3.9.15:

--
Note that some standard Python modules are provided as separate ports
as they require additional dependencies. They are available as:

py39-gdbm       databases/py-gdbm@py39
py39-sqlite3    databases/py-sqlite3@py39
py39-tkinter    x11-toolkits/py-tkinter@py39
=====
Message from git-2.38.1_1:

--
If you installed the GITWEB option please follow these instructions:

In the directory /usr/local/share/examples/git/gitweb you can find all files to
make gitweb work as a public repository on the web.

All you have to do to make gitweb work is:
1) Please be sure you're able to execute CGI scripts in
   /usr/local/share/examples/git/gitweb.
2) Set the GITWEB_CONFIG variable in your webserver's config to
   /usr/local/etc/git/gitweb.conf. This variable is passed to gitweb.cgi.
3) Restart server.


If you installed the CONTRIB option please note that the scripts are
installed in /usr/local/share/git-core/contrib. Some of them require
other ports to be installed (perl, python, etc), which you may need to
install manually.
Step 17: Install package nginx
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 2 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	nginx: 1.22.0_8,3
	pcre: 8.45_1

Number of packages to be installed: 2

The process will require 8 MiB more space.
2 MiB to be downloaded.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/2] Fetching nginx-1.22.0_8,3.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/2] Fetching pcre-8.45_1.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/2] Installing pcre-8.45_1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/2] Extracting pcre-8.45_1: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/2] Installing nginx-1.22.0_8,3...
===> Creating groups.
Using existing group 'www'.
===> Creating users
Using existing user 'www'.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/2] Extracting nginx-1.22.0_8,3: .......... done
=====
Message from nginx-1.22.0_8,3:

--
Recent version of the NGINX introduces dynamic modules support.  In
FreeBSD ports tree this feature was enabled by default with the DSO
knob.  Several vendor's and third-party modules have been converted
to dynamic modules.  Unset the DSO knob builds an NGINX without
dynamic modules support.

To load a module at runtime, include the new `load_module'
directive in the main context, specifying the path to the shared
object file for the module, enclosed in quotation marks.  When you
reload the configuration or restart NGINX, the module is loaded in.
It is possible to specify a path relative to the source directory,
or a full path, please see
https://www.nginx.com/blog/dynamic-modules-nginx-1-9-11/ and
http://nginx.org/en/docs/ngx_core_module.html#load_module for
details.

Default path for the NGINX dynamic modules is

/usr/local/libexec/nginx.
Step 18: Install package gohugo
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 9 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	giflib: 5.2.1
	gohugo: 0.104.3_1
	jbigkit: 2.1_1
	jpeg-turbo: 2.1.4
	libdeflate: 1.14
	libsass: 3.6.4
	png: 1.6.37_1
	tiff: 4.4.0
	webp: 1.2.4

Number of packages to be installed: 9

The process will require 63 MiB more space.
14 MiB to be downloaded.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/9] Fetching png-1.6.37_1.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/9] Fetching jpeg-turbo-2.1.4.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/9] Fetching gohugo-0.104.3_1.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/9] Fetching giflib-5.2.1.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/9] Fetching jbigkit-2.1_1.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [6/9] Fetching webp-1.2.4.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [7/9] Fetching libsass-3.6.4.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [8/9] Fetching tiff-4.4.0.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [9/9] Fetching libdeflate-1.14.pkg: ......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/9] Installing jpeg-turbo-2.1.4...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/9] Extracting jpeg-turbo-2.1.4: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/9] Installing jbigkit-2.1_1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/9] Extracting jbigkit-2.1_1: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/9] Installing libdeflate-1.14...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/9] Extracting libdeflate-1.14: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/9] Installing png-1.6.37_1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/9] Extracting png-1.6.37_1: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/9] Installing giflib-5.2.1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/9] Extracting giflib-5.2.1: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [6/9] Installing tiff-4.4.0...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [6/9] Extracting tiff-4.4.0: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [7/9] Installing webp-1.2.4...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [7/9] Extracting webp-1.2.4: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [8/9] Installing libsass-3.6.4...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [8/9] Extracting libsass-3.6.4: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [9/9] Installing gohugo-0.104.3_1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [9/9] Extracting gohugo-0.104.3_1: .......... done
Step 19: Install package node_exporter
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	node_exporter: 1.3.1_6

Number of packages to be installed: 1

The process will require 11 MiB more space.
3 MiB to be downloaded.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching node_exporter-1.3.1_6.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/1] Installing node_exporter-1.3.1_6...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting node_exporter-1.3.1_6: .......... done
=====
Message from node_exporter-1.3.1_6:

--
If upgrading from a version of node_exporter <0.15.0 you'll need to update any
custom command line flags that you may have set as it now requires a
double-dash (--flag) instead of a single dash (-flag).
The collector flags in 0.15.0 have now been replaced with individual boolean
flags and the -collector.procfs` and -collector.sysfs` flags have been renamed
to --path.procfs and --path.sysfs respectively.
Step 20: Install package syslog-ng
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 5 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	e2fsprogs-libuuid: 1.46.5
	glib: 2.74.0,2
	json-c: 0.16
	libxml2: 2.10.3
	syslog-ng: 3.38.1

Number of packages to be installed: 5

The process will require 57 MiB more space.
7 MiB to be downloaded.
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/5] Fetching libxml2-2.10.3.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/5] Fetching glib-2.74.0,2.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/5] Fetching syslog-ng-3.38.1.pkg: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/5] Fetching json-c-0.16.pkg: ......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/5] Fetching e2fsprogs-libuuid-1.46.5.pkg: ..... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/5] Installing libxml2-2.10.3...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [1/5] Extracting libxml2-2.10.3: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/5] Installing glib-2.74.0,2...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [2/5] Extracting glib-2.74.0,2: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/5] Installing json-c-0.16...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [3/5] Extracting json-c-0.16: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/5] Installing e2fsprogs-libuuid-1.46.5...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [4/5] Extracting e2fsprogs-libuuid-1.46.5: .......... done
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/5] Installing syslog-ng-3.38.1...
[hugo-nginx-amd64-13_1.vsf00001.cpt.za.honeyguide.net] [5/5] Extracting syslog-ng-3.38.1: .......... done
Generating GIO modules cache
Compiling glib schemas
No schema files found: doing nothing.
=====
Message from syslog-ng-3.38.1:

--
syslog-ng is now installed!  To replace FreeBSD's standard syslogd
(/usr/sbin/syslogd), complete these steps:

1. Create a configuration file named /usr/local/etc/syslog-ng.conf
   (a sample named syslog-ng.conf.sample has been included in
   /usr/local/etc). Note that this is a change in 2.0.2
   version, previous ones put the config file in
   /usr/local/etc/syslog-ng/syslog-ng.conf, so if this is an update
   move that file in the right place

2. Configure syslog-ng to start automatically by adding the following
   to /etc/rc.conf:

        syslog_ng_enable="YES"

3. Prevent the standard FreeBSD syslogd from starting automatically by
   adding a line to the end of your /etc/rc.conf file that reads:

        syslogd_enable="NO"

4. Shut down the standard FreeBSD syslogd:

     kill `cat /var/run/syslog.pid`

5. Start syslog-ng:

     /usr/local/etc/rc.d/syslog-ng start
Step 21: Clean package installation
Checking integrity... done (0 conflicting)
Nothing to do.
Nothing to do.
Step 22: Clean cook artifacts
Step 23: Install pot local
Step 24: Set file ownership on cook scripts
Step 25: Make cook script executable
setting executable bit on /usr/local/bin/cook
Step 26: Create rc.d script to start cook
creating rc.d script to start cook
Step 27: Make rc.d script to start cook executable
Setting executable bit on cook rc file
Step 28: Enable cook service
enabling cook
cook enabled in /etc/rc.conf
=====>  Stop the pot hugo-nginx-amd64-13_1
=====>  Remove epair0[a|b] network interfaces
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/tmp
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-13_1/m/dev
Password:Password:===>  exporting hugo-nginx-amd64-13_1 @ 1667664610 to /tmp/hugo-nginx-amd64-13_1_0.0.26.xz

hugo-nginx-amd64-12_3_0.0.26:


hugo-nginx/hugo-nginx:
copy-in -s /usr/local/etc/pot/flavours/hugo-nginx.d/local -d /root/.pot_local
hugo-nginx/hugo-nginx.sh:
#!/bin/sh

# Based on POTLUCK TEMPLATE v3.0
# Altered by Michael Gmelin
#
# EDIT THE FOLLOWING FOR NEW FLAVOUR:
# 1. RUNS_IN_NOMAD - true or false
# 2. If RUNS_IN_NOMAD is false, can delete the <flavour>+4 file, else
#    make sure pot create command doesn't include it
# 3. Create a matching <flavour> file with this <flavour>.sh file that
#    contains the copy-in commands for the config files from <flavour>.d/
#    Remember that the package directories don't exist yet, so likely copy
#    to /root
# 4. Adjust package installation between BEGIN & END PACKAGE SETUP
# 5. Adjust jail configuration script generation between BEGIN & END COOK
#    Configure the config files that have been copied in where necessary

# Set this to true if this jail flavour is to be created as a nomad
# (i.e. blocking) jail.
# You can then query it in the cook script generation below and the script
# is installed appropriately at the end of this script
RUNS_IN_NOMAD=false

# set the cook log path/filename
COOKLOG=/var/log/cook.log

# check if cooklog exists, create it if not
if [ ! -e $COOKLOG ]
then
    echo "Creating $COOKLOG" | tee -a $COOKLOG
else
    echo "WARNING $COOKLOG already exists"  | tee -a $COOKLOG
fi
date >> $COOKLOG

# -------------------- COMMON ---------------

STEPCOUNT=0
step() {
  STEPCOUNT=$(("$STEPCOUNT" + 1))
  STEP="$*"
  echo "Step $STEPCOUNT: $STEP" | tee -a $COOKLOG
}

exit_ok() {
  trap - EXIT
  exit 0
}

FAILED=" failed"
exit_error() {
  STEP="$*"
  FAILED=""
  exit 1
}

set -e
trap 'echo ERROR: $STEP$FAILED | (>&2 tee -a $COOKLOG)' EXIT

# -------------- BEGIN PACKAGE SETUP -------------

step "Bootstrap package repo"
mkdir -p /usr/local/etc/pkg/repos
# only modify repo if not already done in base image
# shellcheck disable=SC2016
test -e /usr/local/etc/pkg/repos/FreeBSD.conf || \
  echo 'FreeBSD: { url: "pkg+http://pkg.FreeBSD.org/${ABI}/quarterly" }' \
    >/usr/local/etc/pkg/repos/FreeBSD.conf
ASSUME_ALWAYS_YES=yes pkg bootstrap

step "Touch /etc/rc.conf"
touch /etc/rc.conf

# this is important, otherwise running /etc/rc from cook will
# overwrite the IP address set in tinirc
step "Remove ifconfig_epair0b from config"
# shellcheck disable=SC2015
sysrc -cq ifconfig_epair0b && sysrc -x ifconfig_epair0b || true

step "Disable sendmail"
service sendmail onedisable

step "Enable SSH"
service sshd enable

step "Create /usr/local/etc/rc.d"
mkdir -p /usr/local/etc/rc.d

# we need consul for consul agent
step "Install package consul"
pkg install -y consul

step "Install package openssl"
pkg install -y openssl

step "Install package sudo"
pkg install -y sudo

step "Install package curl"
pkg install -y curl

step "Install package jq"
pkg install -y jq

step "Install package jo"
pkg install -y jo

step "Install package nano"
pkg install -y nano

step "Install package bash"
pkg install -y bash

step "Install package rsync"
pkg install -y rsync

step "Install package git"
pkg install -y git

step "Install package nginx"
pkg install -y nginx

step "Install package gohugo"
pkg install -y gohugo

step "Install package node_exporter"
pkg install -y node_exporter

step "Install package syslog-ng"
pkg install -y syslog-ng

step "Clean package installation"
pkg autoremove -y
pkg clean -y

# -------------- END PACKAGE SETUP -------------

#
# Now generate the run command script "cook"
# It configures the system on the first run by creating the config file(s)
# On subsequent runs, it only starts sleeps (if nomad-jail) or simply exits
#

# this runs when image boots
# ----------------- BEGIN COOK ------------------

step "Clean cook artifacts"
rm -rf /usr/local/bin/cook /usr/local/share/cook

step "Install pot local"
tar -C /root/.pot_local -cf - . | tar -C /usr/local -xf -
rm -rf /root/.pot_local

step "Set file ownership on cook scripts"
chown -R root:wheel /usr/local/bin/cook /usr/local/share/cook
chmod 755 /usr/local/share/cook/bin/*

# ----------------- END COOK ------------------


# ---------- NO NEED TO EDIT BELOW ------------

step "Make cook script executable"
if [ -e /usr/local/bin/cook ]
then
    echo "setting executable bit on /usr/local/bin/cook" | tee -a $COOKLOG
    chmod u+x /usr/local/bin/cook
else
    exit_error "there is no /usr/local/bin/cook to make executable"
fi

#
# There are two ways of running a pot jail: "Normal", non-blocking mode and
# "Nomad", i.e. blocking mode (the pot start command does not return until
# the jail is stopped).
# For the normal mode, we create a /usr/local/etc/rc.d script that starts
# the "cook" script generated above each time, for the "Nomad" mode, the cook
# script is started by pot (configuration through flavour file), therefore
# we do not need to do anything here.
#

# Create rc.d script for "normal" mode:
step "Create rc.d script to start cook"
echo "creating rc.d script to start cook" | tee -a $COOKLOG

# shellcheck disable=SC2016
echo '#!/bin/sh
#
# PROVIDE: cook
# REQUIRE: LOGIN
# KEYWORD: shutdown
#
. /etc/rc.subr
name="cook"
rcvar="cook_enable"
load_rc_config $name
: ${cook_enable:="NO"}
: ${cook_env:=""}
command="/usr/local/bin/cook"
command_args=""
run_rc_command "$1"
' > /usr/local/etc/rc.d/cook

step "Make rc.d script to start cook executable"
if [ -e /usr/local/etc/rc.d/cook ]
then
  echo "Setting executable bit on cook rc file" | tee -a $COOKLOG
  chmod u+x /usr/local/etc/rc.d/cook
else
  exit_error "/usr/local/etc/rc.d/cook does not exist"
fi

if [ "$RUNS_IN_NOMAD" != "true" ]
then
  step "Enable cook service"
  # This is a non-nomad (non-blocking) jail, so we need to make sure the script
  # gets started when the jail is started:
  # Otherwise, /usr/local/bin/cook will be set as start script by the pot
  # flavour
  echo "enabling cook" | tee -a $COOKLOG
  service cook enable
fi

# -------------------- DONE ---------------
exit_ok

hugo-nginx/hugo-nginx+1:
hugo-nginx/hugo-nginx+1.sh:

hugo-nginx/hugo-nginx+2:
hugo-nginx/hugo-nginx+2.sh:

hugo-nginx/hugo-nginx+3:
hugo-nginx/hugo-nginx+3.sh:

hugo-nginx/hugo-nginx+4:
hugo-nginx/hugo-nginx+4.sh:
Password:===>  Creating a new pot
===>  pot name     : hugo-nginx-amd64-12_3
===>  type         : single
===>  base         : 12.3
===>  pot_base     : 
===>  level        : 0
===>  network-type : public-bridge
===>  network-stack: ipv4
===>  ip           : 10.192.0.5
===>  bridge       : 
===>  dns          : inherit
===>  flavours     : fbsd-update hugo-nginx hugo-nginx+1 hugo-nginx+2 hugo-nginx+3 hugo-nginx+4
=====>  Creating mountpoint /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m
===>  Fetching FreeBSD 12.3
===>  Extract the tarball
=====>  Flavour: fbsd-update
=====>  Starting hugo-nginx-amd64-12_3 pot for the initial bootstrap
=====>  mount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp
defaultrouter: NO -> 10.192.0.1
===>  Starting the pot hugo-nginx-amd64-12_3
Generating host.conf.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
Starting Network: lo0 epair0b.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair0b: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:00:dd:d0:29:0b
	inet 10.192.0.5 netmask 0xffc00000 broadcast 10.255.255.255
	groups: epair
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 10.192.0.1
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Updating motd:.
Updating /var/run/os-release done.
Starting syslogd.
Clearing /tmp (X related).
Starting cron.
Starting sendmail_submit.
Starting sendmail_msp_queue.

Sat Nov  5 16:11:44 UTC 2022
/usr/local/etc/pot/flavours/fbsd-update.sh -> /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp/fbsd-update.sh
=====>  Executing fbsd-update script on hugo-nginx-amd64-12_3
src component not installed, skipped
Looking up update.FreeBSD.org mirrors... 2 mirrors found.
Fetching public key from update1.freebsd.org... done.
Fetching metadata signature for 12.3-RELEASE from update1.freebsd.org... done.
Fetching metadata index... done.
Fetching 2 metadata files... done.
Inspecting system... done.
Preparing to download files... done.
Fetching 125 patches.....10....20....30....40....50....60....70....80....90....100....110....120.. done.
Applying patches... done.
Fetching 1 files...  done.
The following files will be removed as part of updating to
12.3-RELEASE-p8:
/usr/share/zoneinfo/SystemV
The following files will be added as part of updating to
12.3-RELEASE-p8:
/usr/share/zoneinfo/Europe/Kyiv
/usr/share/zoneinfo/GMT
/usr/share/zoneinfo/Pacific/Kanton
The following files will be updated as part of updating to
12.3-RELEASE-p8:
/bin/freebsd-version
/boot/loader
/boot/loader.efi
/boot/loader_4th
/boot/loader_4th.efi
/boot/loader_lua
/boot/loader_lua.efi
/boot/loader_simp
/boot/loader_simp.efi
/boot/pxeboot
/boot/userboot.so
/boot/userboot_4th.so
/boot/userboot_lua.so
/boot/zfsloader
/etc/mtree/BSD.usr.dist
/lib/libalias.so.7
/lib/libcrypto.so.111
/lib/libz.so.6
/rescue/[
/rescue/bectl
/rescue/bsdlabel
/rescue/bunzip2
/rescue/bzcat
/rescue/bzip2
/rescue/camcontrol
/rescue/cat
/rescue/ccdconfig
/rescue/chflags
/rescue/chgrp
/rescue/chio
/rescue/chmod
/rescue/chown
/rescue/chroot
/rescue/clri
/rescue/cp
/rescue/csh
/rescue/date
/rescue/dd
/rescue/devfs
/rescue/df
/rescue/dhclient
/rescue/disklabel
/rescue/dmesg
/rescue/dump
/rescue/dumpfs
/rescue/dumpon
/rescue/echo
/rescue/ed
/rescue/ex
/rescue/expr
/rescue/fastboot
/rescue/fasthalt
/rescue/fdisk
/rescue/fsck
/rescue/fsck_4.2bsd
/rescue/fsck_ffs
/rescue/fsck_msdosfs
/rescue/fsck_ufs
/rescue/fsdb
/rescue/fsirand
/rescue/gbde
/rescue/geom
/rescue/getfacl
/rescue/glabel
/rescue/gpart
/rescue/groups
/rescue/gunzip
/rescue/gzcat
/rescue/gzip
/rescue/halt
/rescue/head
/rescue/hostname
/rescue/id
/rescue/ifconfig
/rescue/init
/rescue/ipf
/rescue/iscsictl
/rescue/iscsid
/rescue/kenv
/rescue/kill
/rescue/kldconfig
/rescue/kldload
/rescue/kldstat
/rescue/kldunload
/rescue/ldconfig
/rescue/less
/rescue/link
/rescue/ln
/rescue/ls
/rescue/lzcat
/rescue/lzma
/rescue/md5
/rescue/mdconfig
/rescue/mdmfs
/rescue/mkdir
/rescue/mknod
/rescue/more
/rescue/mount
/rescue/mount_cd9660
/rescue/mount_msdosfs
/rescue/mount_nfs
/rescue/mount_nullfs
/rescue/mount_udf
/rescue/mount_unionfs
/rescue/mt
/rescue/mv
/rescue/nc
/rescue/newfs
/rescue/newfs_msdos
/rescue/nos-tun
/rescue/pgrep
/rescue/ping
/rescue/ping6
/rescue/pkill
/rescue/poweroff
/rescue/ps
/rescue/pwd
/rescue/rcorder
/rescue/rdump
/rescue/realpath
/rescue/reboot
/rescue/red
/rescue/rescue
/rescue/restore
/rescue/rm
/rescue/rmdir
/rescue/route
/rescue/routed
/rescue/rrestore
/rescue/rtquery
/rescue/rtsol
/rescue/savecore
/rescue/sed
/rescue/setfacl
/rescue/sh
/rescue/shutdown
/rescue/sleep
/rescue/spppcontrol
/rescue/stty
/rescue/swapon
/rescue/sync
/rescue/sysctl
/rescue/tail
/rescue/tar
/rescue/tcsh
/rescue/tee
/rescue/test
/rescue/tunefs
/rescue/umount
/rescue/unlink
/rescue/unlzma
/rescue/unxz
/rescue/unzstd
/rescue/vi
/rescue/whoami
/rescue/xz
/rescue/xzcat
/rescue/zcat
/rescue/zdb
/rescue/zfs
/rescue/zpool
/rescue/zstd
/rescue/zstdcat
/rescue/zstdmt
/usr/bin/c++
/usr/bin/cc
/usr/bin/clang
/usr/bin/clang++
/usr/bin/clang-cpp
/usr/bin/cpp
/usr/bin/ld.lld
/usr/include/net80211/ieee80211_input.h
/usr/lib/libalias.a
/usr/lib/libalias_p.a
/usr/lib/libcrypto.a
/usr/lib/libcrypto_p.a
/usr/lib/libz.a
/usr/lib/libz_p.a
/usr/sbin/bhyve
/usr/sbin/freebsd-update
/usr/share/zoneinfo/Africa/Accra
/usr/share/zoneinfo/Africa/Ceuta
/usr/share/zoneinfo/America/Anguilla
/usr/share/zoneinfo/America/Antigua
/usr/share/zoneinfo/America/Aruba
/usr/share/zoneinfo/America/Atikokan
/usr/share/zoneinfo/America/Bahia_Banderas
/usr/share/zoneinfo/America/Barbados
/usr/share/zoneinfo/America/Blanc-Sablon
/usr/share/zoneinfo/America/Boise
/usr/share/zoneinfo/America/Cancun
/usr/share/zoneinfo/America/Chicago
/usr/share/zoneinfo/America/Chihuahua
/usr/share/zoneinfo/America/Coral_Harbour
/usr/share/zoneinfo/America/Creston
/usr/share/zoneinfo/America/Curacao
/usr/share/zoneinfo/America/Denver
/usr/share/zoneinfo/America/Dominica
/usr/share/zoneinfo/America/Ensenada
/usr/share/zoneinfo/America/Fort_Wayne
/usr/share/zoneinfo/America/Grenada
/usr/share/zoneinfo/America/Guadeloupe
/usr/share/zoneinfo/America/Guyana
/usr/share/zoneinfo/America/Hermosillo
/usr/share/zoneinfo/America/Indiana/Indianapolis
/usr/share/zoneinfo/America/Indiana/Knox
/usr/share/zoneinfo/America/Indiana/Marengo
/usr/share/zoneinfo/America/Indiana/Petersburg
/usr/share/zoneinfo/America/Indiana/Tell_City
/usr/share/zoneinfo/America/Indiana/Vevay
/usr/share/zoneinfo/America/Indiana/Vincennes
/usr/share/zoneinfo/America/Indiana/Winamac
/usr/share/zoneinfo/America/Indianapolis
/usr/share/zoneinfo/America/Kentucky/Louisville
/usr/share/zoneinfo/America/Kentucky/Monticello
/usr/share/zoneinfo/America/Knox_IN
/usr/share/zoneinfo/America/Kralendijk
/usr/share/zoneinfo/America/Los_Angeles
/usr/share/zoneinfo/America/Louisville
/usr/share/zoneinfo/America/Lower_Princes
/usr/share/zoneinfo/America/Marigot
/usr/share/zoneinfo/America/Matamoros
/usr/share/zoneinfo/America/Mazatlan
/usr/share/zoneinfo/America/Merida
/usr/share/zoneinfo/America/Mexico_City
/usr/share/zoneinfo/America/Monterrey
/usr/share/zoneinfo/America/Montserrat
/usr/share/zoneinfo/America/Nassau
/usr/share/zoneinfo/America/New_York
/usr/share/zoneinfo/America/Nipigon
/usr/share/zoneinfo/America/North_Dakota/Beulah
/usr/share/zoneinfo/America/North_Dakota/Center
/usr/share/zoneinfo/America/North_Dakota/New_Salem
/usr/share/zoneinfo/America/Ojinaga
/usr/share/zoneinfo/America/Phoenix
/usr/share/zoneinfo/America/Port_of_Spain
/usr/share/zoneinfo/America/Punta_Arenas
/usr/share/zoneinfo/America/Rainy_River
/usr/share/zoneinfo/America/Santa_Isabel
/usr/share/zoneinfo/America/Santiago
/usr/share/zoneinfo/America/Shiprock
/usr/share/zoneinfo/America/St_Barthelemy
/usr/share/zoneinfo/America/St_Kitts
/usr/share/zoneinfo/America/St_Lucia
/usr/share/zoneinfo/America/St_Thomas
/usr/share/zoneinfo/America/St_Vincent
/usr/share/zoneinfo/America/Thunder_Bay
/usr/share/zoneinfo/America/Tijuana
/usr/share/zoneinfo/America/Tortola
/usr/share/zoneinfo/America/Virgin
/usr/share/zoneinfo/Antarctica/DumontDUrville
/usr/share/zoneinfo/Antarctica/Syowa
/usr/share/zoneinfo/Antarctica/Vostok
/usr/share/zoneinfo/Arctic/Longyearbyen
/usr/share/zoneinfo/Asia/Amman
/usr/share/zoneinfo/Asia/Brunei
/usr/share/zoneinfo/Asia/Damascus
/usr/share/zoneinfo/Asia/Gaza
/usr/share/zoneinfo/Asia/Hebron
/usr/share/zoneinfo/Asia/Ho_Chi_Minh
/usr/share/zoneinfo/Asia/Hong_Kong
/usr/share/zoneinfo/Asia/Jakarta
/usr/share/zoneinfo/Asia/Kuala_Lumpur
/usr/share/zoneinfo/Asia/Saigon
/usr/share/zoneinfo/Asia/Tehran
/usr/share/zoneinfo/Atlantic/Azores
/usr/share/zoneinfo/Atlantic/Jan_Mayen
/usr/share/zoneinfo/Atlantic/Madeira
/usr/share/zoneinfo/Atlantic/Reykjavik
/usr/share/zoneinfo/Chile/Continental
/usr/share/zoneinfo/Chile/EasterIsland
/usr/share/zoneinfo/Eire
/usr/share/zoneinfo/Europe/Amsterdam
/usr/share/zoneinfo/Europe/Belfast
/usr/share/zoneinfo/Europe/Copenhagen
/usr/share/zoneinfo/Europe/Dublin
/usr/share/zoneinfo/Europe/Gibraltar
/usr/share/zoneinfo/Europe/Guernsey
/usr/share/zoneinfo/Europe/Isle_of_Man
/usr/share/zoneinfo/Europe/Jersey
/usr/share/zoneinfo/Europe/Kiev
/usr/share/zoneinfo/Europe/Lisbon
/usr/share/zoneinfo/Europe/London
/usr/share/zoneinfo/Europe/Luxembourg
/usr/share/zoneinfo/Europe/Madrid
/usr/share/zoneinfo/Europe/Malta
/usr/share/zoneinfo/Europe/Monaco
/usr/share/zoneinfo/Europe/Oslo
/usr/share/zoneinfo/Europe/Rome
/usr/share/zoneinfo/Europe/San_Marino
/usr/share/zoneinfo/Europe/Simferopol
/usr/share/zoneinfo/Europe/Stockholm
/usr/share/zoneinfo/Europe/Uzhgorod
/usr/share/zoneinfo/Europe/Vatican
/usr/share/zoneinfo/Europe/Zaporozhye
/usr/share/zoneinfo/GB
/usr/share/zoneinfo/GB-Eire
/usr/share/zoneinfo/Hongkong
/usr/share/zoneinfo/Iceland
/usr/share/zoneinfo/Indian/Christmas
/usr/share/zoneinfo/Indian/Cocos
/usr/share/zoneinfo/Indian/Kerguelen
/usr/share/zoneinfo/Indian/Mahe
/usr/share/zoneinfo/Indian/Reunion
/usr/share/zoneinfo/Iran
/usr/share/zoneinfo/Mexico/BajaNorte
/usr/share/zoneinfo/Mexico/BajaSur
/usr/share/zoneinfo/Mexico/General
/usr/share/zoneinfo/Navajo
/usr/share/zoneinfo/Pacific/Chuuk
/usr/share/zoneinfo/Pacific/Easter
/usr/share/zoneinfo/Pacific/Enderbury
/usr/share/zoneinfo/Pacific/Fiji
/usr/share/zoneinfo/Pacific/Funafuti
/usr/share/zoneinfo/Pacific/Majuro
/usr/share/zoneinfo/Pacific/Niue
/usr/share/zoneinfo/Pacific/Pohnpei
/usr/share/zoneinfo/Pacific/Ponape
/usr/share/zoneinfo/Pacific/Rarotonga
/usr/share/zoneinfo/Pacific/Tongatapu
/usr/share/zoneinfo/Pacific/Truk
/usr/share/zoneinfo/Pacific/Wake
/usr/share/zoneinfo/Pacific/Wallis
/usr/share/zoneinfo/Pacific/Yap
/usr/share/zoneinfo/Portugal
/usr/share/zoneinfo/US/Arizona
/usr/share/zoneinfo/US/Central
/usr/share/zoneinfo/US/East-Indiana
/usr/share/zoneinfo/US/Eastern
/usr/share/zoneinfo/US/Indiana-Starke
/usr/share/zoneinfo/US/Mountain
/usr/share/zoneinfo/US/Pacific
/usr/share/zoneinfo/posixrules
/usr/share/zoneinfo/zone.tab
/usr/share/zoneinfo/zone1970.tab
/var/db/etcupdate/current/etc/mtree/BSD.usr.dist
/var/db/etcupdate/log
/var/db/mergemaster.mtree

WARNING: FreeBSD 12.3-RELEASE is approaching its End-of-Life date.
It is strongly recommended that you upgrade to a newer
release within the next 2 months.
Installing updates...Scanning //usr/share/certs/blacklisted for certificates...
Scanning //usr/share/certs/trusted for certificates...
 done.
=====>  Stop the pot hugo-nginx-amd64-12_3
=====>  Remove epair0[a|b] network interfaces
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/dev
=====>  Flavour: hugo-nginx
=====>  Executing hugo-nginx pot commands on hugo-nginx-amd64-12_3
=====>  mount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp
=====>  Source /usr/local/etc/pot/flavours/hugo-nginx.d/local copied in the pot hugo-nginx-amd64-12_3
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp
=====>  /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/dev is already unmounted
=====>  Starting hugo-nginx-amd64-12_3 pot for the initial bootstrap
=====>  mount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp
defaultrouter: 10.192.0.1 -> 10.192.0.1
===>  Starting the pot hugo-nginx-amd64-12_3
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
Starting Network: lo0 epair0b.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair0b: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:b0:f7:74:ac:0b
	inet 10.192.0.5 netmask 0xffc00000 broadcast 10.255.255.255
	groups: epair
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add net default: gateway 10.192.0.1
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Updating motd:.
Updating /var/run/os-release done.
Starting syslogd.
Clearing /tmp (X related).
Starting cron.
Starting sendmail_submit.
Starting sendmail_msp_queue.

Sat Nov  5 16:12:52 UTC 2022
/usr/local/etc/pot/flavours/hugo-nginx.sh -> /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp/hugo-nginx.sh
=====>  Executing hugo-nginx script on hugo-nginx-amd64-12_3
Creating /var/log/cook.log
Step 1: Bootstrap package repo
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] Installing pkg-1.18.4...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] Extracting pkg-1.18.4: .......... done
Bootstrapping pkg from pkg+http://pkg.FreeBSD.org/FreeBSD:12:amd64/quarterly, please wait...
Step 2: Touch /etc/rc.conf
Step 3: Remove ifconfig_epair0b from config
Step 4: Disable sendmail
sendmail disabled in /etc/rc.conf
sendmail_submit disabled in /etc/rc.conf
sendmail_msp_queue disabled in /etc/rc.conf
Step 5: Enable SSH
sshd enabled in /etc/rc.conf
Step 6: Create /usr/local/etc/rc.d
Step 7: Install package consul
Updating FreeBSD repository catalogue...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] Fetching meta.conf: . done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] Fetching packagesite.pkg: .......... done
Processing entries: .......... done
FreeBSD repository update completed. 32396 packages processed.
All repositories are up to date.
Updating database digests format: . done
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	consul: 1.12.4_2

Number of packages to be installed: 1

The process will require 80 MiB more space.
15 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching consul-1.12.4_2.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Installing consul-1.12.4_2...
===> Creating groups.
Creating group 'consul' with gid '469'.
===> Creating users
Creating user 'consul' with uid '469'.
===> Creating homedir(s)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting consul-1.12.4_2: ..... done
Step 8: Install package openssl
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	openssl: 1.1.1q,1

Number of packages to be installed: 1

The process will require 14 MiB more space.
4 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching openssl-1.1.1q,1.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Installing openssl-1.1.1q,1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting openssl-1.1.1q,1: .......... done
Step 9: Install package sudo
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 3 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	gettext-runtime: 0.21
	indexinfo: 0.3.1
	sudo: 1.9.11p3

Number of packages to be installed: 3

The process will require 8 MiB more space.
2 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/3] Fetching indexinfo-0.3.1.pkg: . done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/3] Fetching sudo-1.9.11p3.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/3] Fetching gettext-runtime-0.21.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/3] Installing indexinfo-0.3.1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/3] Extracting indexinfo-0.3.1: .... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/3] Installing gettext-runtime-0.21...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/3] Extracting gettext-runtime-0.21: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/3] Installing sudo-1.9.11p3...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/3] Extracting sudo-1.9.11p3: .......... done
Step 10: Install package curl
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 7 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	ca_root_nss: 3.83
	curl: 7.85.0
	libidn2: 2.3.3
	libnghttp2: 1.48.0
	libpsl: 0.21.1_4
	libssh2: 1.10.0,3
	libunistring: 1.0

Number of packages to be installed: 7

The process will require 10 MiB more space.
3 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/7] Fetching libnghttp2-1.48.0.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/7] Fetching libidn2-2.3.3.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/7] Fetching libunistring-1.0.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/7] Fetching libssh2-1.10.0,3.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/7] Fetching libpsl-0.21.1_4.pkg: ........ done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/7] Fetching curl-7.85.0.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/7] Fetching ca_root_nss-3.83.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/7] Installing libunistring-1.0...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/7] Extracting libunistring-1.0: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/7] Installing libidn2-2.3.3...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/7] Extracting libidn2-2.3.3: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/7] Installing libnghttp2-1.48.0...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/7] Extracting libnghttp2-1.48.0: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/7] Installing libssh2-1.10.0,3...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/7] Extracting libssh2-1.10.0,3: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/7] Installing libpsl-0.21.1_4...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/7] Extracting libpsl-0.21.1_4: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/7] Installing ca_root_nss-3.83...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/7] Extracting ca_root_nss-3.83: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/7] Installing curl-7.85.0...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/7] Extracting curl-7.85.0: .......... done
=====
Message from ca_root_nss-3.83:

--
FreeBSD does not, and can not warrant that the certification authorities
whose certificates are included in this package have in any way been
audited for trustworthiness or RFC 3647 compliance.

Assessment and verification of trust is the complete responsibility of the
system administrator.


This package installs symlinks to support root certificates discovery by
default for software that uses OpenSSL.

This enables SSL Certificate Verification by client software without manual
intervention.

If you prefer to do this manually, replace the following symlinks with
either an empty file or your site-local certificate bundle.

  * /etc/ssl/cert.pem
  * /usr/local/etc/ssl/cert.pem
  * /usr/local/openssl/cert.pem
Step 11: Install package jq
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 2 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	jq: 1.6
	oniguruma: 6.9.8_1

Number of packages to be installed: 2

The process will require 2 MiB more space.
493 KiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/2] Fetching jq-1.6.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/2] Fetching oniguruma-6.9.8_1.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/2] Installing oniguruma-6.9.8_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/2] Extracting oniguruma-6.9.8_1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/2] Installing jq-1.6...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/2] Extracting jq-1.6: .......... done
Step 12: Install package jo
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	jo: 1.6

Number of packages to be installed: 1

20 KiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching jo-1.6.pkg: ... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Installing jo-1.6...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting jo-1.6: ....... done
Step 13: Install package nano
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	nano: 6.4

Number of packages to be installed: 1

The process will require 3 MiB more space.
593 KiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching nano-6.4.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Installing nano-6.4...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting nano-6.4: .......... done
Step 14: Install package bash
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	bash: 5.2_3

Number of packages to be installed: 1

The process will require 10 MiB more space.
2 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching bash-5.2_3.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Installing bash-5.2_3...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting bash-5.2_3: .......... done
Step 15: Install package rsync
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 5 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	libiconv: 1.17
	liblz4: 1.9.4,1
	rsync: 3.2.5
	xxhash: 0.8.1_2
	zstd: 1.5.2_1

Number of packages to be installed: 5

The process will require 8 MiB more space.
2 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/5] Fetching rsync-3.2.5.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/5] Fetching liblz4-1.9.4,1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/5] Fetching zstd-1.5.2_1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/5] Fetching xxhash-0.8.1_2.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/5] Fetching libiconv-1.17.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/5] Installing liblz4-1.9.4,1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/5] Extracting liblz4-1.9.4,1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/5] Installing zstd-1.5.2_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/5] Extracting zstd-1.5.2_1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/5] Installing xxhash-0.8.1_2...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/5] Extracting xxhash-0.8.1_2: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/5] Installing libiconv-1.17...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/5] Extracting libiconv-1.17: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/5] Installing rsync-3.2.5...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/5] Extracting rsync-3.2.5: .......... done
=====
Message from rsync-3.2.5:

--
Some scripts provided by rsync such as rrsync requires
python which is not installed by default
Step 16: Install package git
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 28 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	expat: 2.4.9
	git: 2.38.1_1
	libffi: 3.4.2
	mpdecimal: 2.5.1
	p5-Authen-SASL: 2.16_1
	p5-CGI: 4.54
	p5-Clone: 0.45
	p5-Digest-HMAC: 1.04
	p5-Encode-Locale: 1.05
	p5-Error: 0.17029
	p5-GSSAPI: 0.28_2
	p5-HTML-Parser: 3.78
	p5-HTML-Tagset: 3.20_1
	p5-HTTP-Date: 6.05
	p5-HTTP-Message: 6.37
	p5-IO-HTML: 1.004
	p5-IO-Socket-INET6: 2.72_1
	p5-IO-Socket-SSL: 2.075
	p5-LWP-MediaTypes: 6.04
	p5-Mozilla-CA: 20211001
	p5-Net-SSLeay: 1.92
	p5-Socket6: 0.29
	p5-TimeDate: 2.33,1
	p5-URI: 5.12
	pcre2: 10.40
	perl5: 5.32.1_3
	python39: 3.9.15
	readline: 8.1.2

Number of packages to be installed: 28

The process will require 227 MiB more space.
41 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/28] Fetching p5-Net-SSLeay-1.92.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/28] Fetching p5-IO-Socket-SSL-2.075.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/28] Fetching p5-Socket6-0.29.pkg: ... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/28] Fetching p5-HTTP-Date-6.05.pkg: .. done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/28] Fetching mpdecimal-2.5.1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/28] Fetching p5-GSSAPI-0.28_2.pkg: ..... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/28] Fetching python39-3.9.15.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [8/28] Fetching p5-URI-5.12.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [9/28] Fetching p5-IO-Socket-INET6-2.72_1.pkg: .. done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [10/28] Fetching p5-CGI-4.54.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [11/28] Fetching p5-Encode-Locale-1.05.pkg: .. done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [12/28] Fetching perl5-5.32.1_3.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [13/28] Fetching p5-HTML-Parser-3.78.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [14/28] Fetching p5-Mozilla-CA-20211001.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [15/28] Fetching p5-LWP-MediaTypes-6.04.pkg: ... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [16/28] Fetching pcre2-10.40.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [17/28] Fetching libffi-3.4.2.pkg: ...... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [18/28] Fetching p5-TimeDate-2.33,1.pkg: ..... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [19/28] Fetching readline-8.1.2.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [20/28] Fetching p5-IO-HTML-1.004.pkg: .. done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [21/28] Fetching p5-Clone-0.45.pkg: .. done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [22/28] Fetching p5-Digest-HMAC-1.04.pkg: .. done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [23/28] Fetching p5-Error-0.17029.pkg: .... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [24/28] Fetching p5-HTML-Tagset-3.20_1.pkg: .. done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [25/28] Fetching expat-2.4.9.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [26/28] Fetching p5-HTTP-Message-6.37.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [27/28] Fetching git-2.38.1_1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [28/28] Fetching p5-Authen-SASL-2.16_1.pkg: ...... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/28] Installing perl5-5.32.1_3...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/28] Extracting perl5-5.32.1_3: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/28] Installing p5-TimeDate-2.33,1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/28] Extracting p5-TimeDate-2.33,1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/28] Installing p5-HTTP-Date-6.05...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/28] Extracting p5-HTTP-Date-6.05: ....... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/28] Installing p5-URI-5.12...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/28] Extracting p5-URI-5.12: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/28] Installing p5-Encode-Locale-1.05...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/28] Extracting p5-Encode-Locale-1.05: ....... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/28] Installing p5-LWP-MediaTypes-6.04...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/28] Extracting p5-LWP-MediaTypes-6.04: ........ done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/28] Installing p5-IO-HTML-1.004...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/28] Extracting p5-IO-HTML-1.004: ....... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [8/28] Installing p5-Clone-0.45...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [8/28] Extracting p5-Clone-0.45: ......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [9/28] Installing p5-Socket6-0.29...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [9/28] Extracting p5-Socket6-0.29: ....... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [10/28] Installing p5-HTML-Tagset-3.20_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [10/28] Extracting p5-HTML-Tagset-3.20_1: ....... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [11/28] Installing p5-HTTP-Message-6.37...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [11/28] Extracting p5-HTTP-Message-6.37: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [12/28] Installing p5-Net-SSLeay-1.92...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [12/28] Extracting p5-Net-SSLeay-1.92: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [13/28] Installing mpdecimal-2.5.1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [13/28] Extracting mpdecimal-2.5.1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [14/28] Installing p5-GSSAPI-0.28_2...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [14/28] Extracting p5-GSSAPI-0.28_2: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [15/28] Installing p5-IO-Socket-INET6-2.72_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [15/28] Extracting p5-IO-Socket-INET6-2.72_1: ....... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [16/28] Installing p5-HTML-Parser-3.78...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [16/28] Extracting p5-HTML-Parser-3.78: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [17/28] Installing p5-Mozilla-CA-20211001...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [17/28] Extracting p5-Mozilla-CA-20211001: ........ done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [18/28] Installing libffi-3.4.2...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [18/28] Extracting libffi-3.4.2: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [19/28] Installing readline-8.1.2...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [19/28] Extracting readline-8.1.2: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [20/28] Installing p5-Digest-HMAC-1.04...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [20/28] Extracting p5-Digest-HMAC-1.04: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [21/28] Installing p5-IO-Socket-SSL-2.075...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [21/28] Extracting p5-IO-Socket-SSL-2.075: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [22/28] Installing python39-3.9.15...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [22/28] Extracting python39-3.9.15: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [23/28] Installing p5-CGI-4.54...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [23/28] Extracting p5-CGI-4.54: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [24/28] Installing pcre2-10.40...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [24/28] Extracting pcre2-10.40: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [25/28] Installing p5-Error-0.17029...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [25/28] Extracting p5-Error-0.17029: ......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [26/28] Installing expat-2.4.9...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [26/28] Extracting expat-2.4.9: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [27/28] Installing p5-Authen-SASL-2.16_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [27/28] Extracting p5-Authen-SASL-2.16_1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [28/28] Installing git-2.38.1_1...
===> Creating groups.
Creating group 'git_daemon' with gid '964'.
===> Creating users
Creating user 'git_daemon' with uid '964'.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [28/28] Extracting git-2.38.1_1: .......... done
=====
Message from python39-3.9.15:

--
Note that some standard Python modules are provided as separate ports
as they require additional dependencies. They are available as:

py39-gdbm       databases/py-gdbm@py39
py39-sqlite3    databases/py-sqlite3@py39
py39-tkinter    x11-toolkits/py-tkinter@py39
=====
Message from git-2.38.1_1:

--
If you installed the GITWEB option please follow these instructions:

In the directory /usr/local/share/examples/git/gitweb you can find all files to
make gitweb work as a public repository on the web.

All you have to do to make gitweb work is:
1) Please be sure you're able to execute CGI scripts in
   /usr/local/share/examples/git/gitweb.
2) Set the GITWEB_CONFIG variable in your webserver's config to
   /usr/local/etc/git/gitweb.conf. This variable is passed to gitweb.cgi.
3) Restart server.


If you installed the CONTRIB option please note that the scripts are
installed in /usr/local/share/git-core/contrib. Some of them require
other ports to be installed (perl, python, etc), which you may need to
install manually.
Step 17: Install package nginx
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 2 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	nginx: 1.22.0_8,3
	pcre: 8.45_1

Number of packages to be installed: 2

The process will require 8 MiB more space.
2 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/2] Fetching nginx-1.22.0_8,3.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/2] Fetching pcre-8.45_1.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/2] Installing pcre-8.45_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/2] Extracting pcre-8.45_1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/2] Installing nginx-1.22.0_8,3...
===> Creating groups.
Using existing group 'www'.
===> Creating users
Using existing user 'www'.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/2] Extracting nginx-1.22.0_8,3: .......... done
=====
Message from nginx-1.22.0_8,3:

--
Recent version of the NGINX introduces dynamic modules support.  In
FreeBSD ports tree this feature was enabled by default with the DSO
knob.  Several vendor's and third-party modules have been converted
to dynamic modules.  Unset the DSO knob builds an NGINX without
dynamic modules support.

To load a module at runtime, include the new `load_module'
directive in the main context, specifying the path to the shared
object file for the module, enclosed in quotation marks.  When you
reload the configuration or restart NGINX, the module is loaded in.
It is possible to specify a path relative to the source directory,
or a full path, please see
https://www.nginx.com/blog/dynamic-modules-nginx-1-9-11/ and
http://nginx.org/en/docs/ngx_core_module.html#load_module for
details.

Default path for the NGINX dynamic modules is

/usr/local/libexec/nginx.
Step 18: Install package gohugo
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 9 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	giflib: 5.2.1
	gohugo: 0.104.3_1
	jbigkit: 2.1_1
	jpeg-turbo: 2.1.4
	libdeflate: 1.14
	libsass: 3.6.4
	png: 1.6.37_1
	tiff: 4.4.0
	webp: 1.2.4

Number of packages to be installed: 9

The process will require 63 MiB more space.
14 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/9] Fetching png-1.6.37_1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/9] Fetching jpeg-turbo-2.1.4.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/9] Fetching gohugo-0.104.3_1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/9] Fetching giflib-5.2.1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/9] Fetching jbigkit-2.1_1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/9] Fetching webp-1.2.4.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/9] Fetching libsass-3.6.4.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [8/9] Fetching tiff-4.4.0.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [9/9] Fetching libdeflate-1.14.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/9] Installing jpeg-turbo-2.1.4...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/9] Extracting jpeg-turbo-2.1.4: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/9] Installing jbigkit-2.1_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/9] Extracting jbigkit-2.1_1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/9] Installing libdeflate-1.14...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/9] Extracting libdeflate-1.14: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/9] Installing png-1.6.37_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/9] Extracting png-1.6.37_1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/9] Installing giflib-5.2.1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/9] Extracting giflib-5.2.1: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/9] Installing tiff-4.4.0...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [6/9] Extracting tiff-4.4.0: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/9] Installing webp-1.2.4...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [7/9] Extracting webp-1.2.4: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [8/9] Installing libsass-3.6.4...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [8/9] Extracting libsass-3.6.4: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [9/9] Installing gohugo-0.104.3_1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [9/9] Extracting gohugo-0.104.3_1: .......... done
Step 19: Install package node_exporter
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 1 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	node_exporter: 1.3.1_6

Number of packages to be installed: 1

The process will require 11 MiB more space.
3 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Fetching node_exporter-1.3.1_6.pkg: .......... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Installing node_exporter-1.3.1_6...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/1] Extracting node_exporter-1.3.1_6: .......... done
=====
Message from node_exporter-1.3.1_6:

--
If upgrading from a version of node_exporter <0.15.0 you'll need to update any
custom command line flags that you may have set as it now requires a
double-dash (--flag) instead of a single dash (-flag).
The collector flags in 0.15.0 have now been replaced with individual boolean
flags and the -collector.procfs` and -collector.sysfs` flags have been renamed
to --path.procfs and --path.sysfs respectively.
Step 20: Install package syslog-ng
Updating FreeBSD repository catalogue...
FreeBSD repository is up to date.
All repositories are up to date.
The following 5 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	e2fsprogs-libuuid: 1.46.5
	glib: 2.74.0,2
	json-c: 0.16
	libxml2: 2.10.3
	syslog-ng: 3.38.1

Number of packages to be installed: 5

The process will require 57 MiB more space.
7 MiB to be downloaded.
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/5] Fetching libxml2-2.10.3.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/5] Fetching glib-2.74.0,2.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/5] Fetching syslog-ng-3.38.1.pkg: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/5] Fetching json-c-0.16.pkg: ......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/5] Fetching e2fsprogs-libuuid-1.46.5.pkg: ..... done
Checking integrity... done (0 conflicting)
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/5] Installing libxml2-2.10.3...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [1/5] Extracting libxml2-2.10.3: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/5] Installing glib-2.74.0,2...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [2/5] Extracting glib-2.74.0,2: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/5] Installing json-c-0.16...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [3/5] Extracting json-c-0.16: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/5] Installing e2fsprogs-libuuid-1.46.5...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [4/5] Extracting e2fsprogs-libuuid-1.46.5: .......... done
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/5] Installing syslog-ng-3.38.1...
[hugo-nginx-amd64-12_3.vsf00001.cpt.za.honeyguide.net] [5/5] Extracting syslog-ng-3.38.1: .......... done
Compiling glib schemas
No schema files found: doing nothing.
Generating GIO modules cache
=====
Message from syslog-ng-3.38.1:

--
syslog-ng is now installed!  To replace FreeBSD's standard syslogd
(/usr/sbin/syslogd), complete these steps:

1. Create a configuration file named /usr/local/etc/syslog-ng.conf
   (a sample named syslog-ng.conf.sample has been included in
   /usr/local/etc). Note that this is a change in 2.0.2
   version, previous ones put the config file in
   /usr/local/etc/syslog-ng/syslog-ng.conf, so if this is an update
   move that file in the right place

2. Configure syslog-ng to start automatically by adding the following
   to /etc/rc.conf:

        syslog_ng_enable="YES"

3. Prevent the standard FreeBSD syslogd from starting automatically by
   adding a line to the end of your /etc/rc.conf file that reads:

        syslogd_enable="NO"

4. Shut down the standard FreeBSD syslogd:

     kill `cat /var/run/syslog.pid`

5. Start syslog-ng:

     /usr/local/etc/rc.d/syslog-ng start
Step 21: Clean package installation
Checking integrity... done (0 conflicting)
Nothing to do.
Nothing to do.
Step 22: Clean cook artifacts
Step 23: Install pot local
Step 24: Set file ownership on cook scripts
Step 25: Make cook script executable
setting executable bit on /usr/local/bin/cook
Step 26: Create rc.d script to start cook
creating rc.d script to start cook
Step 27: Make rc.d script to start cook executable
Setting executable bit on cook rc file
Step 28: Enable cook service
enabling cook
cook enabled in /etc/rc.conf
=====>  Stop the pot hugo-nginx-amd64-12_3
=====>  Remove epair0[a|b] network interfaces
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/tmp
=====>  unmount /mnt/srv/pot/jails/hugo-nginx-amd64-12_3/m/dev
=====>  Flavour: hugo-nginx+1
=====>  Executing hugo-nginx+1 pot commands on hugo-nginx-amd64-12_3
=====>  No shell script available for the flavour hugo-nginx+1
=====>  Flavour: hugo-nginx+2
=====>  Executing hugo-nginx+2 pot commands on hugo-nginx-amd64-12_3
=====>  No shell script available for the flavour hugo-nginx+2
=====>  Flavour: hugo-nginx+3
=====>  Executing hugo-nginx+3 pot commands on hugo-nginx-amd64-12_3
=====>  No shell script available for the flavour hugo-nginx+3
=====>  Flavour: hugo-nginx+4
=====>  Executing hugo-nginx+4 pot commands on hugo-nginx-amd64-12_3
=====>  No shell script available for the flavour hugo-nginx+4

This site © Honeyguide Group (Pty) Ltd, all the hosted software their respective license owners 2020 - 2021 - Disclaimer